1.

Machine elements

The book describes the basis for design and calculation of standardised machine elements.

D.10 Educational activities

COBISS.SI-ID: 67604225

2.

Load capacity of a three-row roller slewing bearing raceway

A calculation model for fatigue lifetime determination of a three-row roller slewing bearing raceway is presented. First, the contact force distribution between the roller and the raceway is analytically determined from the basic bearing geometry and the external loads acting on the bearing assembly. Then a numerical model is employed to calculate subsurface stress distribution in the raceway as a result of the contact force between the roller and the raceway. Finally, the influence of the roller geometry on the fatigue life is pointed out.

B.03 Paper at an international scientific conference

COBISS.SI-ID: 18469128

3.

Fatigue behavior of high chromium steel for rolls

Fatigue behaviour of high chromium steel (HCS) for rolls is presented. The tested specimens are manufactured under similar conditions as real rolls. The tests specimens have been loaded with pure pulsating compression load (load ratio R = 0 in compression) at different load levels. Therefore, a typical S-N curve and appropriate fatigue parameters are determined.

B.03 Paper at an international scientific conference

COBISS.SI-ID: 18469896