P2-0213 — Final report
1.
Simončič B., president of scientific committee: 37th Int. Symp. on Nov. in Textiles, 2nd Int. Symp. on Nov. in Graphics and 7th Int. Symp. of SCA.

The symposiums were carried out from 15th to 17th June 2006 in Ljubljana. Scientific programme of the symposiums included 8 plenary lectures, 85 lectures, 73 posters and the round table discusion which were presented by 180 researchers from 21 countries. This event represented an important international meeting of researchers from the fields of textiles, graphics and color science.

B.02 Presiding over the programming board of a conference

COBISS.SI-ID: 226836992
2.
Mass customization in weaving

Use of CAD/CAM in weaving offers advantages for producers from areas with high labor costs to be competitive with those with low labor costs. Local production for local needs as a major benefit will also keep knowledge on these areas. There are possibilities to incorporate byres in the designing and to enlarge the selling by internet or other kind of electronic media. Present and future possibilities for mass customization in weaving regarding technological, traditional, and economic trends.are analysed. The possible bottle necks in the future woven fabric production is appointed.

B.04 Guest lecture

COBISS.SI-ID: 1943408
3.
GORENŠEK, M., RECELJ, P. Method of thermostabilization of polyester fabrics: patent No. 22257. Ljubljana: Urad RS za intelekt. lastnino, 31.10.2007.

Relevant phase of the analysis of oligomer content using GPC was finished and new aspect of correct running of thermostabilization phase of polyester fabric under tension was determined. Thermostabilisation of fabrics under tension lead to the decrease of migration of oligomers to the surface of fabric later in HT dyeing processes. The achievement was turned to Velana d.d., patented together and is used there. Easy processing means substantial saving at manufacturing of low priced polyesters in HT dyeing. From the point of economical wiev it means cost benefit at the quantity of material used.

F.17 Transfer of existing technologies, know-how, methods and procedures into practice

COBISS.SI-ID: 1944688
4.
Towards customization in fabric production.

The possibility given by the use of modern CAD/CAM technology for production of unique and small range products with equal or lower prices as the regular ranges products is presented. Such approach allows the preservation of this kind of production in developed world that result also in keeping and further development of knowledge in textile production.

B.04 Guest lecture

COBISS.SI-ID: 1698160
5.
Use of weaving coefficient as parameter for explaining and predicting strength of fabrics

Analyzed is the possibility of the use of weaving coefficient for explaining and predicting the strength of woven fabrics. Results show only partial usability, for a group of similar structure and not in general.

B.03 Paper at an international scientific conference

COBISS.SI-ID: 2049904